PLDD-200-12-20-2x2

200 Amp, 12 Bar, 20 Hz, 2" X 2" Pulsed Laser Diode Driver

The PLDD-200-12-20-2X2 is an ultra-compact and light weight version of our standard 200 amp pulsed current source designed to drive laser diode bars, arrays of laser diode bars, or any low impedance load. The unit features a high peak current of 200 amps with a rise-time of <10 µs (load dependent) and a maximum pulse width of 300 µs. The pulse repetition frequency can be varied from single shot to 20 PPS.

click for enlarged view

The output current amplitude can be controlled by either an analog voltage or an on-board potentiometer (jumper selectable). The pulse width is controlled by the duration of the input trigger signal.

Using the optional Universal Interface Board (UIB-01) the user has easy access to all control pins. Commonly used signals are available through BNC connections such as the input trigger and the current monitor which allows the user a real time view of the current.

The PLDD-200-12-20-2X2 requires a user supplied +15 to +28 volt input supply.

PLDD-200-12-20-2x2
200 Amp, 12 Bar, 20 Hz, 2" X 2" Pulsed Laser Diode Driver Data Sheet

Features

• Output Current up to 200 A
• Up to 300 μs pulse width
• Rise-time of <10 μs
• Single-shot to 20 PPS
• Current monitor output 1 volt/100 amps
• Optimized for driving up to 12 bar stacks
• Only 2.9 oz
• Actual dimensions: 1.9" x 1.94" x 1.24"

Please note export restrictions may apply.